"Be the kind of woman that when your feet hit the floor each morning, the devil says...."Oh crap! She's up!" Unknown

Thursday, August 27, 2020

Tucker's Stocking

My daughter and son in law have the best dog.
He is a rescue and is so gentle and well behaved.
I say this as someone who is NOT a dog person.....
at all.

I would take Tucker if something happened to them, though.

My daughter and son in law each have a felted stocking.
Well, actually, they have two!
One at their house and one at mine.
Tucker needed his own stocking.




These Bucilla Kits are so much fun to make.

 


The details are amazing.

 


Down to the bows in this doggies hair!

 


The kits come with a piece of felt for the back,
but the stocking would not hold much of anything if I used
that to finish it.
I quilt a stocking and then stitch the felt to the front.
 I posted a blog post a while ago here that shows how
I make the stocking.
This can now be packed with squeaky toys and rawhides!

I have a kit ready to start for my granddaughter,
who is due on January 1st!

Happy Quilting!


Thursday, August 20, 2020

The Great Quilt Expansion



As I mentioned a few blog posts ago,
my daughter and son-in-law bought a king size bed and
asked if I could make their queen size wedding quilt big
enough to fit their king size bed.
I ordered fabric, bought thread and took the binding off of the quilt.



 


I had a plan in my mind to add a piece of fabric on the top and the bottom
and sandwich the batting in between the two. After this the quilting would be done.

Well, what a disaster that was!  Adding unquilted fabric to a quilted piece
made for a big mess!  It almost looked pleated along the edges...
NOT the look I was going for with this quilt!

Off came the two pieces of fabric and plan B came to mind.


Instead, I would quilt a panel for each side
 and add it with a strip of fabric on the front and the back.

So the quilting began.


For some reason I have the hardest time quilting straight lines
with the guide and my walking foot.
If you don't know, using Frixion pens on solid fabrics leaves a mark
like the fabric has been bleached.
Out came my Clover chalk marker with the little wheel at the top.
It worked like a charm and as I quilted, the chalk came off
and could not be seen at all.
The panels were quilted and trimmed to size.




I cut two pieces of fabric with which to attach the panel to the quilt.
The top piece was cut 1 1/8" wide and the bottom piece was cut
1 5/8" wide and pressed in half length wise.
They were sewn onto the panel with 1/4" seam allowance.





The top strip was then sewn to the edge of the quilt with about a 3/8" seam allowance.



After sewing the panel to the quilt,
I pulled the panel into place and turned the quilt to the back.

 




Dots of glue were placed down the inside of the seam,
 

 


 The folded strip sewn to the back of the panel
was pulled over the glue,




And ironed to seal the glue.

 


The quilt was turned back over to the top
and I stitched in the ditch to catch the backing strip.
(All the different colors of fabric in these photos is
so interesting.  All photos were taken with my iphone, too.)
 
 


VOILA!!



The binding was then added and it's finished!
 I am so excited that my plan worked.

(The quilt is flat! For some reason I didn't take
the time to pull it flat before taking these photos.)

 


I really like the cross-hatch quilting along the sides with
the swirl quilting in the body of the quilt.

 


I do not have a king size bed,
but this was after washing and drying the quilt.
It was a bit crumpled after taking it out of the dryer,
but will straighten out when it's on their bed.

 


Its all folded and ready for delivery.
This expansion took another 11 yards of fabric
and 6 small spools of thread.

If I'm ever asked to do this again,
I think it would be easier to make a new quilt!


Happy Quilting!

Wednesday, August 19, 2020

Vintage Chenille Baby Quilt

It's been a while since I've made anything from
"my cabinet".
For those who might be new to my blog,
at the beginning of COVID, I began pulling projects from
my never ending supply in my cabinet and getting them done.
I was able to complete quite a few projects and make some space.

This project was made from leftover pieces of vintage chenille fabrics.
A few years ago I made a baby quilt for a great niece from
6" blocks I had purchased at the mid-Atlantic quilt show.
The quilt was so soft and cuddly.
The leftover squares had waited long enough to be made into something.
I didn't have a lot of precut squares, but did have a little yardage, 
so cut the yardage to size.




One problem I had with these squares that I didn't have with the first quilt
was I couldn't use my walking foot to quilt them.
It kept getting stuck and wouldn't go over the bumps and puffy parts.

 


I ended up tying the quilt in the center and at the intersections of the blocks.

 


It's a soft and cuddly quilt,
backed with vintage looking cotton from my stash.


 


I don't know that I would buy squares like this again
since they were a challenge to sew together and quilt,
but they make a pretty quilt.
 The true colors are brighter then what is shown here.


 


This one will go into the donate pile.

Happy Quilting!

Wednesday, August 12, 2020

Finished Scrappiness

I have this big plastic jug that originally held big pretzels.
It's the Costco size pretzel jug.
At one point I started putting 2 1/2" squares in this jug
and at the beginning of the isolation it was full.

It was time to do something with these squares.
I had no idea where this quilt would go,
but I started sewing them into 16 patch blocks.

It was fun...put a 16 patch block together and sew.
Do another and sew.
It was the mindless sewing I needed at the beginning
of this isolation time.

I had made a bunch of the blocks and decided it was time to 
move them to the next step.
Onto the design wall they went.
At first I was going to use just white 2 1/2" strips for sashing,
but then this idea came to me to use 9 patch cornerstones
and rows of 2 1/2" squares in between white strips.
(This way I would use up more 2 1/2" squares!)

The top was coming together!
I figured the border would be a solid piece of fabric
and call it done.
However, the 2 1/2" squares said "Not so fast!"
I made more nine patches and sewed those together
to make the borders.

The top was completed.
Then it languished.
Finally, last week I pulled it out to quilt.
Grid quilting was the final decision.

Here is the finished quilt.




I am not one to design my own quilts, for the most part,
but it was fun to see where this one would lead.

 



 There are so many fun fabrics in these blocks.




For the binding,
I pulled out my binding scrap box and used
some darker red pieces.

 


My sewing machine was giving me fits while I was quilting it,
but I finally got it finished.

 


I may have to start filling that jug again!

 


Isn't this backing fabric awesome?!?
I was going to piece a backing from scraps,
but that is my least favorite part of quilting.
Wide backing it is!

This quilt is going to a special couple.
Hopefully it will be delivered this week.


Happy Quilting!

Monday, August 10, 2020

Scrappy Kaffe Blocks

Well, I think it's official.
I think I've turned into a scrappy quilter!
This box of Kaffe scraps is sitting on the floor here in
my Hidey Hole, screaming "Use Me! Use Me!".
 Rectangles were cut from a bunch of different fabrics
and blocks have been made.

Here is what I have!




This is a small sampling of the fabrics I cut into 2 x 3 1/2" rectangles.





The rectangles were sewn into blocks like this.
I do not do random scrappy,
so I had the fabrics on a tray by my sewing machine
and picked each one as I went.



Even with controlled scrappy, I still ended up with
two of the same fabrics in one block.
Oh well...




The pattern I saw had all of the blocks together with
no sashing.  I put them on my design wall like that first,
but it was total chaos.
Not the look I was going for here.

Sashing strips will be added with corner stones.
I'm thinking of finding a white with tiny yellow polka dots
for the sashing and more Kaffe for the corner stones.




The sad thing is, this hardly put a dent in my box of scraps.
There will be more Kaffe scrappiness in my future!  :)


Happy Quilting!



Monday, August 3, 2020

New Bucilla Stocking

It's been a while since I've worked on a
Bucilla Felt Kit.
I've made a number of these over the years
and have a few in my cabinet, waiting to be made.

A few weeks ago I wanted some hand work to do at night
and pulled one of the kits out.
For me, these are so fun and relaxing to make.

This one is called "Santa Paws."
While I am not a dog person,
my daughter and son-in-law have a wonderful
rescue English Lab.
This stocking will be for Tucker.  :)




The details in these kits are so wonderful
and the directions are clear and precise...
as long as you go in the order given.

 


I usually do most of the embroidery first,
then cut the pieces in the order given
and stitch them together.

 


This was last weeks progress.

 


Last night I finished the dog bowl and bone at the bottom.
There are two more dogs to make and a few
other little things.

Once the front is finished,
I make a quilted stocking and will stitch this front to it.
The little felt backing that is included in the kit
is just not sturdy enough.

I purchase a lot of my kits from
(no affiliation)

I'll link to Design Wall Monday today.

Happy Quilting! (and stitching!)